Receiving and transport

Cold-chain dispatch and transport record

Connect dispatch, journey checks and handover with traceable product and consignment records.

Free to use and adapt. Includes blank records, instructions and fictional examples.

Version 1.0 · Source guidance reviewed 18 September 2026
Food manufacturing · Food retail · Warehousing · Transport · Institutional food service

Actual blank journey checks form included in this pack

A4 landscape PDF. Select the preview to open the full document.

How to use this template

  1. Identify the consignment, product or batch, vehicle, dispatch site and destination. Attach a manifest when a load contains multiple batches.
  2. Set product-specific transport limits, measurement methods and check frequency. Note packaging, seals and pre-cooling checks before loading.
  3. Record dispatch, journey and receipt observations using dated timestamps. Label air or logger readings separately from product-probe measurements.
  4. Document delays, loss of control, product isolation and handover acceptance. Carry any time-control exposure into the batch's cumulative record.

Inside the pack

Use the blank forms for your own records. The examples below show how fields are used; they are fictional and do not prescribe operational limits.

Journey checks

Header setup: record dispatch site, destination, vehicle and manifest reference in the site setup field.

See fields and worked example
Consignment / product / batch
C18 / dairy / manifest M18
Stage / location
Receipt / Site B
Date and time
18/09/2026 09:30
Reading °C / method
3.8 / food probe P2
Approved limit / condition
Chilled specification met; seal intact
Deviation / action
Accepted; no deviation
Custodian / handover
Driver AS / receiver JT

Before you use it

A completed journey log supports traceability but does not prove every product remained safe. Investigate gaps and excursions using your approved transport and product-disposition procedure.

Adapt these supporting records to your products, processes and approved food safety plan. They are not HACCP certification or a complete site-specific food safety program. Establish and validate limits with a competent person before use. Examples are fictional and are not prescribed limits.