HACCP planning

Corrective action and product disposition record

Document the deviation, isolate affected food and retain the evidence behind the final product decision.

Free to use and adapt. Includes blank records, instructions and fictional examples.

Version 1.0 · Source guidance reviewed 18 September 2026
Hospitality · Food manufacturing · Food retail · Warehousing · Transport · Institutional food service

Actual blank deviation and disposition form included in this pack

A4 landscape PDF. Select the preview to open the full document.

How to use this template

  1. Assign an action ID and record the deviation, detection time, process, limit and evidence. Identify all potentially affected lots and quantities.
  2. Record immediate containment and the person responsible. Keep product on hold pending an authorised decision when safety is uncertain.
  3. Record the investigation, root cause and product disposition with its evidence and authorisation. Include disposal, rework or release references as applicable.
  4. Assign preventive actions and due dates. Close the record only after verification confirms the action was effective.

Inside the pack

Use the blank forms for your own records. The examples below show how fields are used; they are fictional and do not prescribe operational limits.

Deviation and disposition

Use one action ID across containment, product disposition and follow-up records.

See fields and worked example
Action ID / detection time
CA18 / 18/09/2026 07:10
Deviation / limit / evidence
CR1 alarm; history incomplete
Product / lots / quantity
Batch D18 / 12 units
Containment / owner / time
Hold; segregated by AS at 07:15
Disposition / evidence
Awaiting food-safety assessment; no release
Authoriser / date
JT / review pending

Follow-up and closure

Record root cause, prevention and verification separately from the immediate correction.

See fields and worked example
Action ID / root cause
CA18 / door seal damage
Corrective / preventive action
Replace seal; add seal check
Owner / due date
Maintenance / 19/09/2026
Evidence of completion
Work order WO18 pending
Effectiveness check / result
Review temperature trend after repair
Closure approval / date
Open; verification pending

Before you use it

Correcting an equipment fault does not establish that affected food is safe. Make and document a separate product decision using your approved procedure and competent review.

Adapt these supporting records to your products, processes and approved food safety plan. They are not HACCP certification or a complete site-specific food safety program. Establish and validate limits with a competent person before use. Examples are fictional and are not prescribed limits.