System overview

How an automated temperature monitoring system works

A wireless sensor in each fridge, freezer or room measures the temperature and sends it by radio to a gateway on site. The gateway passes each reading over your internet connection to a cloud dashboard. The dashboard stores it, compares it with the limits you set, and sends an SMS, email or app alert to the people you choose when a limit is crossed. The same stored readings become the timestamped record you show an auditor.

Thermalog dashboard showing simulated device readings and an alarm
Actual dashboard, simulated demo data.

The four parts

Sensor, gateway, cloud, alert.

Every automated system, ours included, is built from the same four parts. Knowing what each one does makes systems easier to compare.

1

Sensors measure

What it does. A battery-powered sensor in the fridge, freezer, coolroom or storeroom measures the air and sends the reading by radio at a set interval. Nothing is wired into the equipment.

In Thermalog. The TESEN sensor ($179 ex GST) uses the Texas Instruments TMP117 chip, specified to ±0.1 °C from −20 to 50 °C, with a −40 to 120 °C operating range and a CR2450 battery rated for more than two years. There is also a temperature and humidity sensor with a display ($156), the Wisen probe for core-temperature checks ($281) and a door contact ($51).

When comparing. Ask for accuracy across the range you actually run, not the best-case figure. Check battery life and whether you also need humidity, core temperatures or door events.

2

The gateway connects

What it does. The gateway collects readings from every sensor in range and sends them to the cloud. It is the only part that needs mains power and internet.

In Thermalog. Sensors talk to the gateway over ZigBee, a low-power mesh radio with about 50 m indoor range. The Cloud Gateway ($361) has no screen, connects by 2.4 GHz WiFi or Ethernet with Power over Ethernet, and serves up to 32 devices. The Tablet Gateway ($1,781) adds an on-site Android screen and serves up to 64. A range extender ($72) carries the signal through concrete walls or to another floor.

When comparing. How many sensors one gateway serves, how it connects, and what happens when the power or internet drops. Walls, metal shelving and coolroom panels shorten radio range, so test coverage in the real positions.

3

The cloud records

What it does. The cloud stores every reading, compares it with the limits for that unit and keeps the history, viewable from anywhere.

In Thermalog. Readings go to the Thermalog dashboard, which opens in any browser and in the Android and iOS apps. History is stored for two years and can be exported as reports. Several sites sit in one dashboard, each with its own alert rules and staff access.

When comparing. How long history is kept, how you export it, who can change a limit, and what happens to your data if you stop paying.

4

Alerts reach a person

What it does. When a reading crosses a limit, the system tells someone. The alert is the part that saves stock; the record is the part an auditor reads.

In Thermalog. SMS and email alerts are included in the monthly fee, with push notifications and alarms in the Android and iOS apps. The Tablet Gateway also sounds an on-screen alarm on site. Door contacts alert when a door stays open longer than you allow.

When comparing. Which alert channels the monthly fee covers, how many people can receive an alert, and whether you can set a short delay so a defrost cycle or a delivery does not page anyone.

When something goes wrong

A coolroom fails overnight. What happens next.

Say a compressor stops at 1 am on a Saturday. The sensor keeps reporting as the air warms. Once a reading passes the upper limit for that unit, and stays there for any delay you have set, the dashboard raises an alarm.

Who gets the alert

The recipients you set for that site, by SMS, email and app notification. Set thresholds, recipients and escalation rules during setup, name more than one person, and agree who responds out of hours.

How long until it fires

There is no single number. It depends on how often the sensor reports, the delay you set and whether the gateway is online. Test a controlled alert during installation, as the installation overview recommends.

If the gateway goes offline

Remote readings and alerts stop until power and internet return, and missed readings may not be recovered. A sensor that stops reporting shows as offline in the dashboard. Keep a manual backup check for outages.

What the record shows afterwards

The history shows when the temperature started rising, how high it went and when it recovered. Staff acknowledge the alarm and log the corrective action against it, with a photo if useful. The record supports your decision about the stock; it does not establish that the stock is safe.

See the readings. Follow the alert.

Actual dashboard · simulated demo data.

Simulated restaurant dashboard showing device temperatures and a coolroom temperature graph
Review current conditions and temperature history. View full-size screenshot
Simulated freezer alarm showing warning stages and an example corrective action
Review alarm events and record corrective actions. View full-size screenshot
More dashboard views
Actual demo showing a dry-store device selected with temperature and humidity history
Review temperature and humidity together where the device supports both measurements. View full-size screenshot
Actual mobile dashboard with simulated temperature cards and alarm status
Check your connected site from a phone. View full-size screenshot
About these screenshots

Thermalog version 0.45.1, captured on 15 September 2026. Phone previews crop the original captures; enlarge to see the complete screen.

Try the demo

Records

The records an auditor sees.

Food Standards Code 3.2.2A. An environmental health officer expects evidence that you monitor storage temperatures and act when they are out of range: date, time, unit, reading, who checked it and what was done. Continuous monitoring produces the storage part of that record for every unit, including overnight and on weekends. For what a cafe, restaurant or caterer should monitor and what it costs, see our food safety temperature monitoring system.

HACCP. An automated system covers monitoring and record-keeping for storage temperatures. The hazard analysis, critical limits and corrective procedures are still yours to set.

Strive for 5. Vaccine fridges must hold 2 °C to 8 °C, with twice-daily minimum and maximum readings. Continuous records add the history between those checks; they do not replace them.

For everything an automated system does not record, use the free logs, cleaning records and HACCP planning templates in the resource library.

Cost

What it costs.

The smallest Thermalog system is one Cloud Gateway and one TESEN sensor: $540 ex GST for the hardware, then $4 a month for monitoring, about 13 cents a day. Each extra sensor is $179 plus $4 a month. A door contact is $2 a month, and gateways and range extenders have no monthly fee. You own the hardware, it carries a two-year warranty, shipping is free across Australia and monitoring has no lock-in contract.

See every price on the pricing page, or price your own site in the system builder.

Example kitIncludesHardware ex GSTMonitoring/month inc GST
Starter KitCloud Gateway + 3 wireless sensors. Cafés, pharmacies, small kitchens.$898$12
Small Business KitCloud Gateway + 5 sensors. The most common setup for restaurants and retail.$1,256$20
Tablet Kit — 10 sensorsWall-mounted Tablet Gateway + 10 sensors. Supermarkets, labs, multi-room sites.$3,571$40
Complete Business KitTablet Gateway + 10 sensors + Wisen core-temp probe. The full kitchen toolkit.$3,852$44

Common questions.

Do I need an electrician or an IT person to install it?

Usually not. Sensors are battery powered and need no wiring. The gateway needs a power point or a PoE network port and an internet connection by WiFi or Ethernet. Setup help by phone from Newcastle is free.

What happens if the internet or power goes out?

Remote readings and alerts need a powered gateway and a working internet connection. Do not assume readings missed during an outage will be recovered. Check the site and follow your backup monitoring procedure until the gateway is back online.

How often does a sensor send a reading?

It depends on the sensor model, firmware and gateway configuration. Confirm the interval during setup, because it also sets how quickly an alert can follow a change.

Does an automated system replace manual temperature checks?

No. Keep the manual, core-temperature and backup checks your food safety program or current guidance requires, such as the twice-daily readings in Strive for 5.

Can one system cover more than one site?

Yes. Each location needs its own gateway with power and internet, and every location appears in the same dashboard with its own alert rules and staff access.

Is Thermalog an Australian remote monitoring system?

Yes. Thermalog is Australian owned and supported from Newcastle NSW, with prices in Australian dollars and free shipping Australia-wide.

Thermalog · 1300 557 836 · info@thermalog.com.au · Get help choosing